Yamaha RD250 A Coil connection | Motorcycle Forum

1 - 1 of 1 Posts

Celticroamer

·

Registered

Joined 8 days ago

·

1 Posts

Discussion Starter • #1 • 8 days ago

Can anyone out there confirm to me how the HT lead connects to the coil on a Yamaha RD250 A (1974) Is it a straight push on connection or is it threaded, if so is it left or right hand. Must be my eyesight but I can not make it out for the life of me. Whatever I do it seems very easy to be able to disconnect the HT lead.

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Motorcycle wont start, please help

Motorcycle Repair

I have a 2014 Honda Cbr 250, it has less than 500 miles on it total and I can't get it to start. It will start turning over but wont fully start, if I spray starting fluid in it it will start for a moment but wont stay on. I've checked the spark plug and it's still good and I think it's a fuel...
- 3
- 34
- MotorLee · updated 31 mins ago
2010 Victory Kingpin coolant

Motorcycle Repair

I have been riding this bike for about 2 months now and bikes are new to me. My buddy said we should check the coolant and top it off the next time we're in the garage. So I'm looking through my owner's manual, and there is no mention of coolant or a coolant reservoir anywhere whatsoever. This...
- 9
- 63
- J
  JaxKingpin2010 · updated 46 mins ago
Katana GSX750F Burnt Clutch

Motorcycle Repair

Hey guys! First post here! I just wanted to confirm that my clutch is completely shot. I wonder how it happen tho, seem to my that the clutch cable was to tight? Or the last owner really liked dumping the clutch.
- 5
- 56
- SamV · updated 2 hours ago
My bike suddenly lost all electricals.

Motorcycle Repair

I have a 2000 Kawasaki Vulcan 800. I went out to start it a couple weeks ago and, after turning on ignition key, all the lights went on as usual. As soon as I touched the starter button all the lights went out and the bike went completely dead, and it's been that way since. I've checked the...
- 23
- 439
- Groatski · updated 2 hours ago
My bike is overheating. 1995 kawasaki vulcan en500

Motorcycle Repair

1995 kawasaki vulcan en500. My bike has been over heating. On a short ride the other day it started spewing radiator fluid. Today I took the radiator off. Gave it an at home pressure test by blowing on it, found no holes. And then flushed it. Once reassembled, I added coolant to the radiator and...
- 14
- 200
- Sillybones · updated 2 days ago

Join now to ask and comment!

Top