Motorcycle Forum banner

Starter Switch

1014 Views 1 Reply 2 Participants Last post by  CB750F
I am going to need a new starter switch for my 83 VT750C. The existing one is going bad. It's part of the right controls and I don't want to replace the whole thing. Does anyone know of a starter switch that I could install in it's place. I checked the starter, and the armature is OK. I'll be putting new brushes in as soon as they arrive.
Rocksolid
1 - 2 of 2 Posts
Check with some of the OEM online parts places. There are quite a few. I looked at one and didn't see any though. You can rig one up by tapping into the wires for the solenoid and using a universal starter button or huntin' up a used switch assembly on Ebay.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top