Motorcycle Forum banner
1 - 2 of 12 Posts

· Registered
126 Posts
I would take a compression reading on the cylinders as step 1. Compare them to the specs and make sure they are not significantly different across each of the cylinders

Carbureted bike, right? When was the last time you rebuilt the carburetor(s)? If it has been awhile, I would do this and I would put all high/low speed adjustments back to OEM if that applies.
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.