Motorcycle Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi went down a while ago. Just getting
Around to repairing it one piece at a time. I noticed the header pipes got pushed into the belt and it melted a bit into the belt itself I needed to know if it was possible to still ride with it or if I need to replace it


i1288.photobucket.com/albums/b492/wramos1091/Mobile%20Uploads/image_zpse5e07f11.jpg

i1288.photobucket.com/albums/b492/wramos1091/Mobile%20Uploads/image_zps4d15fe28.jpg

i1288.photobucket.com/albums/b492/wramos1091/Mobile%20Uploads/image_zps8c8a6dcd.jpg

i1288.photobucket.com/albums/b492/wramos1091/Mobile%20Uploads/image_zps86871bd3.jpg
 

·
American Legion Rider
Joined
·
20,010 Posts
You can use it for testing repairs but it should be changed before you hit the streets for real with it. If you ever accelerate hard it could snap and that could cause yet another crash. Not a cheap repair I know but then what's your life worth? You really never know what a bike will do when a belt breaks. Could just fall out or could lock things up solid. I'd change it.:thumbsup:
 
1 - 3 of 3 Posts
Top