Motorcycle Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So I recently purchased a Yamaha XT125r 08 Reg. I decided I wanted a 15t front sprocket instead of the stock 14t. The sprocket arrived this morning but the issue I'm having is the current retainer plate is about 4mm off and the screws fixtures are about 2mm off on the new sprocket. Does each sprocket need it's unique retainer plate or am I just missing something.

I've checked that the new sprocket was for my model and REG year which it is. I've looked everywhere for a new retaining plate but I just can't find anything.

Any information would be great.
 
1 - 1 of 1 Posts
Top