Motorcycle Forum banner
1 - 2 of 2 Posts

· Gone
Joined
·
24,005 Posts
It's usually straight forward. You may have to remove the footpegs and shift lever.

Drain the oil first. Make sure all old gasket material is completely removed, being careful not to damage the aluminium, since it is really soft.

Use a new gasket and make sure the bolts are snug, but not over-tightened.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top