Motorcycle Forum banner
1 - 4 of 4 Posts

·
Ace Tuner
Joined
·
4,641 Posts
Remove the plug. Replace the 'O' ring seal. You should be good to go.

There is a special tool that fits the plug correctly. A modified large screwdriver (rounded blade tip) would work. A 'grind to fit' piece of steel works too.
Or you could just use a big screwdriver but it'll probably knock some of the chrome off....
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top