Motorcycle Forum banner
Status
Not open for further replies.
1 - 1 of 10 Posts

Β· Very Famous Person
Joined
Β·
9,894 Posts
--

Making your own dipstick may be a workable idea. If you put in the required amount, run the bike for a minute or so, then let it settle for awhile. If you can get a stick into an open enough reservoir, then notch where the level is full. Some time when it's a half inch lower, measure how much you add to get it back up to the full mark. Then you know where the 2-1/2 liter (or some amount) level is. Being down a half liter should not hurt anything. Apparently you were running it down 1.2 liters.

Have you tried to get a manual on that bike? That might give you some hints.

--
 
1 - 1 of 10 Posts
Status
Not open for further replies.
Top