Motorcycle Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Hi guys! I recently bought a 83 Honda CM250C for 200 bucks. I flushed the old gas from the gas tank and carburator and replace it with fresh gas. It started right up, but if I don't put the choke on, I have to give it some throttle and not a constant throttle to keep it running. And with the choke on, the idle isn't stable but at least the bike stay running. I tried the mixture screw and idle screw which help the engine to keep it running a little longer but dies after 5 seconds or less.

I have no real idea to what to do now. So if you guys have some, I'll be happy to hear them ?

Thx !
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.