Motorcycle Forum banner

Highway Pegs Must have for Tall Riders

4524 Views 1 Reply 2 Participants Last post by  Porky
1 - 2 of 2 Posts
Nice video as always my Friend!

All of those Highway pegs will very soon loosen up and 'spin' on the engine guard!

What I always do, is after everything has been tested, moved and tested again and all is well, I drill a small 1/8 inch hole through the foot peg clamp and into the engine guard and then 'Tap' the hole for a small stainless steel bolt and then the setup will never move on you.:grin:

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.