Motorcycle Forum banner

Help with carb mixture...

1191 Views 1 Reply 2 Participants Last post by  CB750F
Hey guys and gals, I've a 1977 GS750B, pods and 4into1 VH header, just did a valve adjustment on it and synched carbs, anyone have a baseline for fuel screws with that set up or even stock?? It has VM26SS carbs on it. Im running rich and am trying to sort it out. Thanks in advance!!

1 - 2 of 2 Posts
Try a turn and a half out from bottomed on your mixture screws. If you have to go less than 1.5 turns put one size smaller pilot jet in it. Usually pods lean it out though.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.