Motorcycle Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Help please. I went through the diagnostic procedure on my 2011 fat bob (holding trip button and switching ign on etc) and after the fault codes it gives a part number which I cannot find anywhere on the internet. The read out says PN32920-07d. Even the local dealership doesn’t know what it is. The bike is pretty stock no aftermarket power commander or anything... I’ve been having cut out problems while driving for sometime and have already replaced the throttle position sensor and check all elec connections it went away for two months but has returned with a vengeance. - thanks in advance
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #3 ·
That really helpful thank you very much. The fact that mine ends with the letter d wouldn’t signify anything different as it has the same part umber I’m guessing? I’ve seen some posts about clearing the ECM by turning the ign on and off three times. I’ll try this as a last ditch attempt and if that doesn’t work might have to have the local dealership take some cash ? off me to replace the offending item. Thanks again Critter. PJ
 
1 - 3 of 3 Posts
Top