Motorcycle Forum banner

Fixing a few issues

662 Views 1 Reply 2 Participants Last post by  Stablefull
So I just bought my first bike, 2004 Ninja 250r. The tailight was working and then I unplugged the connector and now it won’t come on. Also, are the housings on each side of the taillight supposed to have lights in them? If so, mine don’t and i don’t even see a connector for them. Also wanting to do fluid flushes and changes as well as brakes. Any tips, pointers, etc? Need all the help I can get! Thanks!
1 - 2 of 2 Posts
Welcome, that's a good starter bike!

If you go back to the main page and scroll down, we have a repair/maintenance section. This is where you should post this, as the techs like to hang out there and they probably won't see it here. I can tell you this though; get a manual. Everyone will tell you that first thing
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.