Motorcycle Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,587 Posts
There should be a 6" long wiring harness on the bulb with a connector at one end. Trace it down 6" and disconnect the connector. Toss the bad light, and plug the connector from the bike into the back of your new halogen bulb and reinsert it into the housing.

LED doesn't install any differently than halogen, its just a much bigger bulb because it has a big heat sink or fan on the back combined with a 6" wire harness on it. Just more to it, but no different from the OE halogen in the way it connects/installs.
 
1 - 1 of 1 Posts
Top