Motorcycle Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all, new to the forum. I am at a loss with my 74 CB360G. It will only run on one cylinder, never on both. Randomly, either the right or left. I've changed points, condenser, plugs, both coils and even cleaned and rebuilt the carbs. No change. The bike is in very good condition with only 10,000 miles on it. Thanks in advance. Mark
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top