Motorcycle Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Hi Everyone, I have a 1985 CB700SC with low miles. It sat for a few years. So I rebuild to carbs and had the carb bodies professionally "boiled out". Now all put back together , it idles fine, which it didn't do before. And revs up fine passed 1500 RPMs. But the problem is...getting it to rev off of an idle, it wants to stall. I've tried opening the pilot screws from 2 turns but to 4 turns out but still the stalling trying tom rev off an idle. Any ideas? Thanks! Kevin
 
1 - 1 of 1 Posts
Top