Motorcycle Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Alright so I bought a magna running for 500 bucks and the previous owner couldn’t work on carbs and wouldn’t go over 50 so I bought it took it home cleaned the high speed jets and have been having issues with old gaskets and seals and what not. I got float bowl seals installed and they don’t leak but there is a steel gas line the links each carburetor to another but the o ring went bad and a washer that backs up the o ring is missing I need 8 washers and 8 o rings does anyone know where I can find these or can possibly pull them off of another bike? Any recommendations at all are appreciated
 

· Registered
Joined
·
3,160 Posts
https://www.partzilla.com/catalog/honda/motorcycle/1984/vf500c-a-v30-magna/carburetor-assy

You might be able to get a joint pipe assy from these guys and then size the o-rings you need from there at an o-ring supply store. Once you determine the o-ring size, these guys have some good quality ones. E-bay could be a **** shoot as you do not want to take a chance on poor quality. the same with fuel jets. Use OEM or at least use a japanese supplier. Too many vendors are selling stuff [chinese] of poor quality

https://newmotorcycleparts.net/fuel_system_parts/special_fuel_o-rings.html


The same supplier also offers kits for the VF 750 C Magna, but not for the 500. I suppose that you could buy one 0-ring of each size for your Kei-hin or Mikiuni carb and order more once you determine fitment.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top