[Mytzie]

Have a little problem. Recently installed new Front signal lights, the front are working, but the indicator on dash does not blink, and rear signal lights not working. They were working before. Reinstalled old lights and still have the same problem. The fuses are fine. What's the most likely problem? Could it just be a ground? Used tester and no power going to back tail lights or dash signal light display.

 

[Motogrady]

I’d use that tester and check for voltage starting at the rear and work back to the headlight. There are a slew of wires and connectors behind the headlight. Sounds like a molex plug got disturbed maybe?

What model do u have? C F or K?

 

[willieketchum]

Have a little problem. Recently installed new Front signal lights, the front are working, but the indicator on dash does not blink, and rear signal lights not working. They were working before. Reinstalled old lights and still have the same problem. The fuses are fine. What's the most likely problem? Could it just be a ground? Used tester and no power going to back tail lights or dash signal light display.

Use a voltage tester and start at the fuse box and work your way forward or backwards on the wiring and connectors until you get to a place where the voltage tester or test light no longer registers. It is most likely a bad ground somewhere.