[xpebrian]

have 1973 suzuki tc100 blazer wont start no spark as far as i know coil is good but no nspark wont start any sugestions if i need to pull the flywheel magnetto where is a good place to get the puller thanks in advance for any help Brian

 

[CB750F]

Probably the points are either shot, corroded or just plain out of adjustment. Could be the condenser also. You can pick up a flywheel puller from www.denniskirk.com or www.bikebandit.com or one of the other places on the net that sell bike parts and tools or a dealer will have one or can get you one.

 

[xpebrian]

hello there i have the 27mm flywheel puller suzukie said was the right size for my 1973 suzukie tc100 but it wont screw in to the trhrads on the flywheel where it is supposed to go any ideas anybody know what size puller is used on this bike so i can make shure i have right size thanks in advance brian

 

[CB750F]

Should screw into the threads, see if they are reverse threads. If the threads are balled up some it won't screw into there.

 

[xpebrian]

NEED HELP

Probably the points are either shot, corroded or just plain out of adjustment. Could be the condenser

GOT MAGNETO OFF BIKE ONE OF THE THREE COILS IS DAMAGED BROKEN COPPER WINDING IS THIS SOMPTHING THAT CAN BE REPLACED OR NOT IF SO ANY IDEAS ON WHERE TO FIND REPLACEMENT THANKS ALOT BRIAN

 

[CB750F]

Yes, it's called a stator. You can probably still get one from Suzuki but it ain't gonna be cheap. Check around on Ebay for one.

 

[xpebrian]

need help help

hello have 1973 suzuki tc100 blazer and was looking for a stator plate or compleate engin any body knoow of source for thease parts