custom

This bike is my baby and has always been stored in my garage. This bike has never been in an accident, laid down, scratched, or damaged in any way. It has always been meticulously maintained. MUST SEE bike in person to appreciate, as pictures don't do it justice. I get compliments daily on...

My dad is looking to sell his motorcycle and I've elected to give him a hand. He's the second owner of the bike and bought it off of a woman who felt that it was too much for her after putting only 900 miles on it back in '83. I'm trying to get him the best price for his bike and I'm afraid...

S&S 124” engine S&S super G Carb. – carb body machined for Thunder Jet w/ –AN fitting (aircraft style) fuel inlet Pro-One Triple Trees and Forks – Trees have 5 degrees built in (Total bike rake 43 degrees) Hooker Headers Troublemaker Exhaust Baker Right Side Drive 6 speed Transmission w/...

I am new to this site because it seems that ZX6e.net is down. I have a 93 ZX6E with the front fairing/RAM air system and the side fairings from the 98 ZX6R. the aftermarket fairings are fiberglass. Vance and Hines SS2R exhaust. aftermarket lights(except rear turn signals). KOSO gauge(needs...

I am somewhat new to sport bikes and trying to learn as i go along. I have my eyes on a Kaw Ninja 250 for a project bike on craigslist but i am unsure to get it so i could use some advice. It is a pre-gen: 2004, less than 3k miles on it. Gas tank needs painting "Part out or drop new engine in...

I am looking for a website that allows you to create your own motorcycle. Hopefully one that will allow you to choose a frame type, wheel base, etc. I am hoping to find one that's free, but if not a software would be ok too.

Hey everyone, I just bought my first bike and wanted to put some work into it so I bought once needing a new stator. I was told it would start after this...well it doesn't. I have put in a new battery, a stator, a new starter solenoid relay and still nothing. It used to start to turn but would...

So I've been looking around and I've seen some places where they make their own luggage racks. I've decided to go for this and have a metal shop cut it for me. Has anyone else tried this? I have a 2007 V star 1300, I'm probably going to be attaching it to the sissy bars or the fender stays. If...

Hello all! I searched the how to section here, but to no avail. I was wondering if anyone has tips on installing a universal fiberglass seat to a bike using existing mounting brackets. I cannot post pictures yet, but it's an xr750 style flat tracker seat and I'm mounting to a '78 Honda Cb400t...

If you love motorcycles, then Townsend, TN, is the place to be this Spring for Two Wheel'n the Smokies! Join us in the Great Smoky Mountains for the Southeast’s premier custom bike show, drive and rally featuring the finest professional and amateur bikes. One-Off Customs, Cruisers, Touring...

Hey, Ive been looking at every resource for parts I know. Craigslist, eBay, Google, Junkyards, and I cant find what I'm looking for. I need the whole headlight assembly for my 1983 CB1000c Custom. Does anybody have any idea where to look or if there is an another model that will work?

Hi Everyone, Streamline Designs is not new to the motorcycle industry, we have been around for 8 years. Specializing in custom designs, custom bikes, cars, one off cars for celebrities etc. Austin Weiss was inducted into the Motorcycle Hall of Fame as "Youngest Master Builder in History" Our...

o here is my 81 CM400 Custom build/rebuild. I bought this bike a couple years back from an old manager of mine for $200 with new tires and bat. in it. I rode it as my first bike never really took good care of it cuz it frankly sucked! to my knowledge anyway. the last few months I have been more...

Hey everyone, I purchased this bike about a month and a half ago and finally got it running after tearing the carbs apart twice. During my second teardown, I noticed that there were no springs, and only one washer (out of 4) for the pilot jets on all 4 carburetors. I tuned the pilots the best I...

I'm having a problem with my starter on my 1980 Honda cb900c. My engine will turn over a couple times, then it seems the starter lets go and just spins out, then comes to a halt while grabbing a few teeth. so, I have pulled the starter, put power to it, seems to spin no prob, lots of power. I...

Short Intro - We are Eye Kandi - We are located in the midwest & Specialize in Custom Paint, Airbrushing, Art & Design. Just found this forum, it seems to be quite the place.

I just bought a 1979 Honda CX 500 Custom that only was running on one clyinder, most of the time. When it did run on two, which was not very often, it instantly went back to one when I opened up. The guy I got it from thought that the coil was bad but I tested for spark and it was good. So then...

I'm 17 and just bought my first bike, a 1979 Honda CX500 Custom. It only ran on one cylinder when I bought it and I am attempting to fix it up. The guy who sold it to me thought that it had a bad coil, but I checked it and I'm getting healthy spark. Next I thought I had better focus on the fuel...

anyone riding/living in denver colorado and know of someone who could help with building a custom seat for my virago? thanks

hey guys im looking into giving my bike a new look by adding some pinstripe decals and i was wondering if any of you have used decals (or better yet pinstripe decals ) on your bike. if so how did it turn out? was it difficult to put on? how did they weather? anyways thanks for the advice/ info...