Motorcycle Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Vintage Forum
    I bought a 1968 Honda CL350 three summers ago and planned to restore it by the end of the summer but was only able to dismantle it fully before I had to move and no longer had space or funds to restore it. Currently, I have some free time on my hands but not enough to put it all back together...
  2. 🔧 Motorcycle Repair 🔧
    My cable popped a few weeks ago, and after 2 weeks of waiting for the replacement part, I figured it would be a quick replace, but was apparently wrong. I took note of how the other one was connected, swapped it out, and now the clutch doesn't work. First, it seemed like it was too tight. I...
  3. 🔧 Motorcycle Repair 🔧
    I have no compression in 1 of the cylinders...can't figure out what the problem is. Any suggestions on how to pinpoint the problem? (I do not have the shop manual handy and have had trouble finding one online.)
  4. First Bike / New Rider
    hey i'm a new rider looking for my first bike cheap, looking for advice on which to get. 3 options 1. broken down honda 71 cb 350. The engine is seized with 12,340 miles on it, the carbs need to be rebuilt, needs new tires, and it does have pitting/rust.Pretty much everything is there except...
  5. Honda
    What should the compression be on a newly rebuilt CB350 engine that is not broken in yet with tri ground valves? The CLYMER manual and my source says the compression for the stock engine should rise to the peak in about 5 to six kicks with the first kick about half of the compression and each...
1-5 of 5 Results