Motorcycle Forum banner
cam
1-3 of 3 Results
  1. Vintage Forum
    Hey guys, my compression was really low so after finding the shims were leaving too little clearance and causing two of my valves to stay open I ordered the tool needed to remove my shims. However, not the tool. The original doesn't look to be found anywhere outside of the UK and these new...
  2. Motorcycle Repair
    I am rebuilding the top end of on my 1994 VT1100c. I am having trouble setting up the timing between the crank markings and the cam. There are a number of marks on the crank, |F|F|FT and |F|F|RT. According to the service manual, I am supposed to line up the |FT with the stationary mark on the...
  3. General Motorcycle Discussion
    I've got a 1981 XS 1100H sittin' in the garage. It started burning oil and smoking out the tail pipes after riding it for a few months last summer. I found a serious amount of oil in the air cleaner box (a puddle of oil in the bottom of it). Compression test told me I'm going to need new...
1-3 of 3 Results
Top