|
06-12-2012, 12:12 PM
|
#1 |
|
Motorcyclist
Join Date: Jun 2012
Posts: 9
 |
CB350 Carburetor Adhesive Question
I know the title is vague, but I couldn't put the words together in a short description.
I was cleaning the tubes in my carburetor, and when I removed to bottom plate to expose the tubes and float I realized that it was stuck to the caeburetor with some type of adhesive. Is this a special kind of adhesive? I know some carbs (ATVs in my past experience) will have thermal paste on specific parts. I'm just curious what type of adhesive this is so I can replace it. The adhesive goes around the outside edge of the rubber o ring, and is pinkish red in color if that helps. Thanks. |
|
|
|
06-12-2012, 12:31 PM
|
#2 |
|
Administrator
Join Date: May 2008
Location: Illinois, USA
Posts: 15,907
|
That was most likely gasket sealer. The Permatex aviation (Number 3) sealer is good for fuel applications.
__________________
2008 XL1200R To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
|
|
|
|
07-17-2012, 03:56 PM
|
#3 |
|
Verified
Join Date: Jul 2012
Location: N.C.
Posts: 27
|
What bike?
|
|
|
|
 |
| Thread Tools | Search this Thread |
|
|
