Fender problems with a new slip-on exhaust?

Austin127 · 08-11-2012, 03:02 PM

I have a 2007 ZX-6R and it still has the long and unneccesary mudflap rear fender still on it, however I just ordered a Yoshi RS 5 slip on exhaust. I found this picture on the website...

http://www.yoshimura-rd.com/popup.as...ge/3331_3_.jpg

Those are the stock turn signals and brake light, and thats exactly what I want my bike to look like. Do you think they just cut off the mud flap, or is that an actual rear fender kit?

Dodsfall · 08-12-2012, 11:20 AM

It's hard to tell from the picture.

If you do a neat job bobbing the fender, you can simply trim it down and have it look great.

Austin127 · 08-13-2012, 02:46 PM

How difficult is it to bob the fender? and what tools do you think I'd need..

jrw69 · 08-22-2012, 07:46 PM

Isn't there two screws that hold the mudflap on either side of where it mounts underneath the brake light?? If I remember correctly they may be allen screws.

Gunner75 · 09-06-2012, 02:18 AM

They are called fender eliminators, they are found almost every website and tons of them are made, if you want a streamline look do some research for one. Ebay has a ton of them specifically for your bike. More then likely the one you sited is probably a custom kit. already searched up for you for all styles at a great website. just refine the search for your bike

http://www.motorcycle-superstore.com...T.ac=SLIsearch

08-11-2012, 03:02 PM	#1
Austin127 Verified Join Date: Mar 2010 Location: Omaha, Nebraska Posts: 27	Fender problems with a new slip-on exhaust? I have a 2007 ZX-6R and it still has the long and unneccesary mudflap rear fender still on it, however I just ordered a Yoshi RS 5 slip on exhaust. I found this picture on the website... http://www.yoshimura-rd.com/popup.as...ge/3331_3_.jpg Those are the stock turn signals and brake light, and thats exactly what I want my bike to look like. Do you think they just cut off the mud flap, or is that an actual rear fender kit? Last edited by Austin127; 08-11-2012 at 03:05 PM..

08-12-2012, 11:20 AM	#2
Dodsfall Administrator Join Date: May 2008 Location: Illinois, USA Posts: 15,880	It's hard to tell from the picture. If you do a neat job bobbing the fender, you can simply trim it down and have it look great. __________________ 2008 XL1200R To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

09-06-2012, 02:18 AM	#5
Gunner75 Senior Member Join Date: May 2012 Location: Jackson Center Ohio Posts: 218	They are called fender eliminators, they are found almost every website and tons of them are made, if you want a streamline look do some research for one. Ebay has a ton of them specifically for your bike. More then likely the one you sited is probably a custom kit. already searched up for you for all styles at a great website. just refine the search for your bike http://www.motorcycle-superstore.com...T.ac=SLIsearch Last edited by Gunner75; 09-06-2012 at 02:24 AM..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-13-2012, 02:46 PM	#3
Austin127 Verified Join Date: Mar 2010 Location: Omaha, Nebraska Posts: 27	How difficult is it to bob the fender? and what tools do you think I'd need..

08-22-2012, 07:46 PM	#4
jrw69 Senior Member Join Date: Jul 2012 Location: Texas Posts: 465	Isn't there two screws that hold the mudflap on either side of where it mounts underneath the brake light?? If I remember correctly they may be allen screws.