![]() |
|
|
#1 |
|
Verified
Join Date: Apr 2011
Location: MInneapolis, MN
Posts: 38
![]() |
Hey guys have a ninja a friend has he picked it up cheap.
But the bike won't run. It turns over it sometimes will start And run for a few minutes but then dies. I pulled the carbs and Cleaned everything needles, seats , high and low jets. But still won't run plugs are good but fouled has good spark But still won't run. Any help or suggestions would be appreciated. Thanks, Dave |
|
|
|
| Advertisement | [Remove Advertisement] |
|
|
|
|
|
#2 |
|
Take it to the track
Join Date: Apr 2011
Location: Vista, CA
Posts: 137
![]() |
How long will it run before dying? Maybe a bad petcock if a short period of time, or a bad fuel tank vent if it runs for a while before dying.
|
|
|
|
|
|
#3 |
|
Verified
Join Date: Apr 2011
Location: MInneapolis, MN
Posts: 38
![]() |
Oh sorry forgot to post that it had leaking petcock, which I rebuilt.
I know for sure it has good fuel flow at the carbs |
|
|
|
|
|
#4 |
|
Verified
Join Date: May 2011
Posts: 17
![]() |
Have you taken apart the engine (or had a mechanic do it), the inside could have a part rusted or damaged from a previous rider
|
|
|
|
|
|
#5 |
|
Verified
Join Date: Apr 2011
Location: MInneapolis, MN
Posts: 38
![]() |
nope not yet.
I am a certified Auto Tech , I do all my own cycle work as well , i can figure out most things. Of course for my bikes i have a manual , which he does not have . Going to check compression next and put in a new set of plugs. Dave |
|
|
|
|
|
#6 |
|
Senior Member
Join Date: Jan 2008
Location: Kentucky
Posts: 290
![]() |
Check air box for squirrel's nests. Check valves for proper clearance. Don't drop knock pins down cam chain tunnel.
|
|
|
|
|
|
#7 | |
|
Verified
Join Date: Apr 2011
Location: MInneapolis, MN
Posts: 38
![]() |
Quote:
I will keep you informed. |
|
|
|
|
|
|
#8 |
|
Senior Member
Join Date: Jan 2008
Location: Kentucky
Posts: 290
![]() |
You are welcome. EX500 is a great bike IMHO.
|
|
|
|
|
|
#9 |
|
Verified
Join Date: Apr 2011
Location: MInneapolis, MN
Posts: 38
![]() |
yeah he paid like $500.00 i think for it needs a little tlc but i think it will be a nice first bike for him.think it has like 5000 miles or so on it.
|
|
|
|
|
|
#10 |
|
Senior Member
Join Date: Jan 2008
Location: Kentucky
Posts: 290
![]() |
Wow, good deal. New plugs might help a lot. Sometimes cleaning fouled plugs does not work.
|
|
|
|
|
|
#11 |
|
Registered
Join Date: Jun 2012
Posts: 1
![]() |
Hey guys, sorry to disturb this sleeping forum, but I have a 2001 Ninja EX500R that seems to have a similar problem to what Dave had. My bike with about 8.5k miles on it, died on me about two weeks ago. I road it fine one day, and the next I started it up, seemed a little sluggish while running ( but it was a pretty cold day ), and then I came to a stop sign and it stalled. To give you a good image it sounded and felt like it had run out of gas, but I had a full tank of gas. So I walked it about a block home, and have been troubleshooting it since. Checked and replaced battery, sparkplugs, and just checked petcock, air filter and fuel line. I am getting spark, and have no apparent obstructions to fuel flow.
help? |
|
|
|
|
|
#12 |
|
Registered
Join Date: Jul 2012
Posts: 1
![]() |
hey guys i have a little bit different problem... i recently bought a 2000 ninja 250r. it wont start. it wont turn over. battery is fine solenoid is fine and starter is fine. i can start the bike jumping the solenoid and it runs fine. but if i turn the key on and hit my starter button i get a click... if i pull the clutch in and push the button i get nothing not even a click... any help would be great
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
|
|