Motorcycle Forum banner

Can't find Neutral on Honda Rebel?

42K views 52 replies 28 participants last post by  sandylemberg 
#1 ·
Hi, I just bought my first bike - a 2005 Honda Rebel with 3,300 miles. Everything works great, the only trouble I'm having is finding neutral on the bike.

I've only tried when stopped, but it seems impossible to get to it. I know it's a half click between 1st and 2nd gears, but whenever I shift up it goes straight to 2nd gear, no matter how light I press up.

Is there a trick to getting it into neutral- such as by moving the bike or playing with the clutch- or is there something wrong with my bike?

Thanks!
 
#2 ·
Sometimes its difficult to get a bike into neutral when stopped. I'd try moving the bike forward a tad and trying. If that doesn't work, move it forward, release the clutch just until it starts to grab, then pull it back in and try again.
 
#4 ·
replied in your other thread, but basically the same as what primalmu says. I've got the Vulcan 500, which is essentially the same set up as the Ninja 500 and do at times have this issue with neutral. It happens. If you think its a mechanical adjustment needed have it checked under warranty.
 
#14 ·
Solution

I had the same problem finding neutral on my wife's '05 Rebel with 2700 miles on it. Almost regretted buying the bike. After trying many suggested "fixes", extensive research and experimentation I finally fixed the "finding neutral problem". The solution is to replace the clutch friction plates. I bought aftermarket friction plates on eBay. They worked perfect. Now the bike pops into neutral perfectly and very easily with no problems. I suspect Honda received defective clutch friction plates from their supplier in late '04 through '05 but they kept their mouth shut about it.

Also the shifting is much smoother through the gears and the idle-in-gear(clutch in) creeping is gone.

Brent
 
#18 ·
I had the same problem finding neutral on my wife's '05 Rebel with 2700 miles on it. Almost regretted buying the bike. After trying many suggested "fixes", extensive research and experimentation I finally fixed the "finding neutral problem". The solution is to replace the clutch friction plates. I bought aftermarket friction plates on eBay. They worked perfect. Now the bike pops into neutral perfectly and very easily with no problems. I suspect Honda received defective clutch friction plates from their supplier in late '04 through '05 but they kept their mouth shut about it.

Also the shifting is much smoother through the gears and the idle-in-gear(clutch in) creeping is gone.

Brent
Did you have to change the clutch disks as well? Please provide link to the clutch plates. Thanks.
 
#19 ·
What you'll need.

1. You'll need the special socket for the "honda" nut that holds the clutch together.

This is the one I bought. Ebay item number 220426094264 (just copy and past this number into ebay search)

2. I also bought EBC brand clutch plates on ebay. Ebay item number 300258166370

3. You'll also need to rig up something to hold the clutch basket still while you loosing the clutch nut. I rigged up a tool with some scrap metal I had lying around. If you want a pic of my homemade tool maybe I can send it to you. Apparently this forum wont let me post links or pics until I have reached 15 posts.

4. About the clutch nut, some say it should not be reused, but another dealer said its ok to put it back on. I put it back on and again, 1 year later no problem. Just make sure you set it to factory torque specs.

I've been using Motul Synthetic oil only because it was recommended as a remedy for the finding neutral/shifting problem , though it don't fix the problem, I wasn't about to throw it out since it cost $12 a quart. I'm using it even though it EBC recommends against it. I have not noticed any problems in over a years of drive. If anything the shifting would be even smoother with synthetic oils.
 
#21 ·
2009?

drclark.

I just realized from your earlier post you own a 2009 and having shifting and neutral finding problems. That's the first time I hear someone reporting that problem on anything other than '04 - '05.

Maybe its best if you take it in for warranty work. There shouldn't be any shifting or neutral finding problems on an '09.

B
 
#22 ·
I bought a brand new rebel approx 2 months ago, and could not get it into neutral when stopped no matter what I tried. I complained to the Honda Sports rep and he told me they never had any complaints of this nature on the Rebel, but authorized a clutch replacement. Still does it. I feel that in the spirit of full disclosure that they should have warned me before buying of this problem.
 
#23 ·
It 's the nature of the bike. I brought it in for warranty as well and Honda sales rep said there is nothing wrong with the bike. F**king Honda should tell us about this problem before we bought it. The Yamaha VStar 250 does not have this problem and I did my road test on it. Part of the test was to find neutral and if I had used the Rebel I would probably be screwed.
So ****ed with this neutal ****.
 
#27 ·
The thread made me laugh. My motorcycle school used a lot of Rebels and they all had this issue. Rolling them forward a bit helped, as does getting used to it. By the end of the course I didn't even think about it.

I have 70s and 80s Honda CBs and CMs now and I can easily find neutral by mistake, like when I don't kick hard enough from 1st and I'm slowing down in traffic. Vroom VROOM. Oh s***!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top