whats the best way to fill a small hole in the fairing?

[Tdubb]

I would like to fill 4 small holes that was drilled into the fairing to install an aftermarket flushmount blinker. I already have the touch up paint, I'm just wondering whats the best thing to fill the holes with.

[rexmitchell]

Maybe a little bondo would do the trick! What kind of flush mounts did you get?

[BillTheCat]

give this a quick read.

http://www.urethanesupply.com/2020_info.php

[EatSomeIron]

if the holes aren't too big (drill size) you could try some loctite. comes in a small bottle by the touch up paint. fill in the hole, wait for it to try, and sand it smooth.

Good Luck

[daw840]

I think you're making Rex nervous. Drilling holes in his baby and all!

[Tdubb]

Well, the ones I got are not the right ones, and all the ones I can find look the same. They need to be more square with rounded edges instead of the oval shape with one end bigger than the other.

So that project has been put on hold.

[rexmitchell]

I think you're making Rex nervous. Drilling holes in his baby and all!

:o Ok just a little, Im actually just curious to see what it looks like when hes done!