k the discusting wiring is in my room now, and im understanding it coming out of 1 of the plugs on the control modual, 3 wires lead to the coils, then 1 of them splits into 2 wires, so we have 4 wires, which connect to the coils, also coming out of that same plug is a wire that leads to a 2 connecter plug that hooks up to the engine, the other wire for that connecter goes to the fuse box. now coming out of the second plug on the control modual, there is 3 wires left ( there was obviously more but they were cut) and 2 of them lead to another plug that i dont know what it connects to i belive its to the rad fan. the other wire leads to the fuse box, and it is right ontop of the other wire for the other connecter to the motor, so i think they are connecter, just with a fuse. i think i will keep the control modual, seams simpler, but get rid of the fuse box and most of this wiring mess. not sure if im making sense to you, but i think im understanding this. the main thing that worries me is the 3 prong plug that comes out of the motor, that has been cut out of the wiring, and was there before so thats my mistake. but im gonna try and sort this out, then figure that out after.